The UK 2050 Calculator Web Flash Excel Wiki
Register or sign in
This is a wiki Anyone can contribute, therefore we don't vouch for its accuracy.

DECC estimates District Heating Network Appartment Blocks 2011

Return to the cost.

Showing just the changes made in the edit by Michael Clark at 2011-07-13 14:57:32 UTC

See all changes since this wiki was released

2011-07-13


Title: DECC estimates District Heating Network Appartment Blocks 2011

Content: http://chp.decc.gov.uk/cms/cost-of-district-heating/

Heat Network costs

The flow and return pipework costs alone can vary significantly from approximately £500-£1,100 per metre and depend on a range of factors including:

Ground conditions (soft or hard dig), Other buried services, Number of bends, Method used for joining pipework (clamped or welded). The heat density is key to making heating networks viable. For example the majority of housing stock in the UK is typically heated water based space heating and could potentially be connect to district heating schemes. However there are few distict heating networks in the UK and other countries such as Demark have developed schemes very successfully. Housing stock is one of the key differences between many of the countries that have successfully deployed large scale district heating networks and the UKm, in these other countries there are a greater proportion of flats than in the UK, increasing the heat density and lowering network cost for the same number of customers supplied.

Heating station costs

The client interface of the district heating system is discussed in the district heating technology section. The cost of the system interface will vary depending on type and the size of the heat load to be served. A typical domestic hydraulic interface unit (HIU) might cost in the order of £2,000 with installation and including a heat meter. These costs of a client interface for industrial and steam applications would be significantly more and would vary accourding to the client and network operators needs. 

Operational Costs

The key operational costs for a district heating network include:

Network pumping costs, Billing administration (meter reading, billing, debt collecting), Network maintenance (this would typically be expected to be limited), Network interface maintenance (i.e. HIU), this may be paid for by the heat customer, Fuel costs, CHP/heat source maintenances costs and operation costs.



User: Michael Clark

Signed off by: 

Signed off at: 

Cost category: District Heating Network cost data

Cost source: DECC estimates cost source

Valid for quantity of fuel: 

Valid in year: 2011

Efficiency: 

Life: 

Size: 

Fuel: 

Operating: 

Capital: £(2010)4000/Household

Default fuel unit: 

Default operating unit: 

Default capital unit: 

Label: Appartment Blocks

Output: